Blog

Carbon Monoxide Sensor/Detector and Transmitter For Ventilation Control

Make :- MSR Germany

Area Of Application:-   

MSR Germany Carbon Monoxide (CO) Detectors and Transmitters save energy costs by controlling ventilation equipment (Fan) in areas where high concentrations of CO may present serious health problems.  Various building and occupancy codes require that ventilation fans run 100% of the time in enclosed areas, such as parking garages, unless a CO monitoring system is installed in that particular areas .

The MSR Germany Carbon Monoxide Detector/Transmitter has an excellent sensing unit (Electrochemical – Gel Type Sensor Cell ).  As carbon monoxide levels increase, contacts are provided to actuate ventilation equipment (Fan) and an audible internal alarm will activate if CO levels continue to rise.  Since ventilation equipment is only required when CO levels are elevated, energy costs for HVAC operation are significantly reduced. 

 Carbon Monoxide Transmitter is used to provide a proportional analog signal to the Multi-Input Control Panel or a Building Management System (BMS).                

Ideal for :
Parking area, garages, chiller rooms and heating, as well as dusty & humid area like pharmaceuticals, coal mine, conveyor belt, cement plant, thermal power plants, flour mills,
powder industries.

Key Points :- 

• Carbon Monoxide with enhanced CO radical detection capability
• Very early smouldering fire and smoke detection.
• VESFA system (very early smoke and fire alarm)

SPECIFICATIONS:- 

Continue reading “Carbon Monoxide Sensor/Detector and Transmitter For Ventilation Control”

CO Sensor Transmitter

Carbon Monoxide Sensor Transmitter with enhanced CO Gas radicals detection capability

Make :- MSR Germany

Area Of Application:-                        

Ideal for :
Parking area, garages, chiller rooms and heating, as well as dusty & humid area like pharmaceuticals, coal mine, conveyor belt, cement plant, thermal power plants, flour mills,
powder industries.

Key Points :- 

• Carbon Monoxide with enhanced CO radical detection capability
• Very early smouldering fire and smoke detection.
• VESFA system (very early smoke and fire alarm)

SPECIFICATIONS:- 

• Sensor Model Available in : – MA, MC2, SC2, PX2 Series.
• Measuring Gas: Carbon Monoxide, Enhanced CO + radicals Detection.
•  Sensor element (cell):- Electrochemical Diffusion, Electrolyte type Gel based (no leak, no membrane rapture, no orientation problem & no false alarm)
•  Measuring Range: – 0-300 ppm (Standard)
• Connection: – Two and Three wire sensor
• Response time T90:-  ≤ 50 Sec
• Warm-up time (First Time):- ≤ 3 Min.
• Protection Class Available in : IP44/54/65/66 (Flameproof and weatherproof )
• Stability & resolution: – ± 3 ppm
• Sensor life expectancy:- ≥ 5 years (Site Feedback ≥ 10 Years  )
• Calibration Interval: 1 Year.
• Sensor Coverage Area: – 700 m² to 750m², ideal condition.
• Humidity non-condensing : 15-90% RH
• Working temperature :–10°C to 50°C
• Power supply:-  18 – 28 VDC ( Overload protected)
• Analog output signal :- Standard: 4-20 mA Linear Output, also availabel in 2-10VDC
• Flammability: – UL 94: V2
• Warranty: 12 Month only on manufacturing defects
• Guidelines Approval : EMC Directives 2004/108/EC, EN 61010-1:2010, ANSI/UL 61010-1, CAN/CSA-C22.2 No. 61010-1, ATEX , SIL2, CE, UL , IECEX.

For Technical Datasheet please click here 

Explosion Proof Differential Pressure Switch – Air or Other Non-Aggressive, Combustible Gases

Explosion proof differential pressure switch for differential pressure, overpressure and vacuum pressure monitoring of air, clean gases, dry vapour for HVAC applications in building, commercial and industrial area. With its adjustable knob, you can set any switching point within the range. With its intrinsically safe certification, it can be installed in Zone 1 and Zone 2 hazardous area.

Explosion Proof BECK Differential Pressure Switch

For air, clean gases, dry vapour
Model: 930.8x Ex (For Hazardous area Zone 1, Zone 2)

930.8x Ex is explosion proof 930_Ex-Proof_Differential Pressure Switchdifferential pressure switch for hazardous area or flameproof classified area installation. This DP switch can be used for monitoring over-pressure, vacuum and differential pressure of air or other non-combustible, non-aggressive gases.

where x is:

• 0 = 20-300 Pa with switch differential of 10Pa (0.2 to 3 mbar)
• 3 = 50-500 Pa with switch differential of 20Pa (0.5 to 5 mbar)
• 5 = 200 – 1000 Pa with switch differential of 100Pa (2 to 10 mbar)

Differential pressure Switch 930 Ex comes with an adjustable knob which can be rotated, thus it can set at required threshold differential pressure to switch changeover contacts, for pressure control & automation.

Key Features:

• Explosion proof Zones 1 and 2 with ATEX certification
• Adjustable knob to set switch at any desired switching pressure
• Transparent enclosure for ease to monitor switch point
• Squeezing cable gland to dust and moisture protection
• Robust performance over the life
• Easy installation
• IP54 protected
• Maximum operating pressure: 10 kPa
• Operating temperature: -20 deg cel to + 80 deg cel
• Silicone diaphragm, tempered at 200 deg cel
• Switch rating: max. 1.0A / 250 VAC
• Certification: Low Voltage Directive 2006/95/EC; RoHS Directive 2011/65/EC

Some suggested fields of application include:

• Monitoring air filters and ventilators
• Monitoring industrial cooling-air circuits
• Overheating protection for fan heaters
• Monitoring flows in ventilation ducts
• Controlling air and fire-protection flaps
• Frost protection for heat exchangers
• Airflow switch

For more details please feel free to Contact us 

Flame Detector : With Analog Output

Gas Alarm India in association with  Gas Alarm – Australia takes pride to introduce flame detector in India.

Detector / transmitters / ANALYZER / MONITORING for explosion proof hazardous area (zone 1, 2)

Detector or sensor transmitter for online, continuous monitoring of all type of flame/fire. These transmitters offer German industry standard analog output in current or voltage form, or digital signals like Modbus RTU with RS485 serial interface. Optionally, these are also equipped with potential free relays.

These can be mounted on wall, ceiling, columns, ducts or pipelines. These can be single gas or multi-gas detection transmitters.

The sensor instruments are SIL 2 certified to offer best safety.

For More Details : Please click here

Gas Detector Cartridge For Combustible/Flammable Gases Along With RS 485 Interface Sensor Board

ALVI Automation also trading as GasAlarm brings to you a revolutionary product in the field of Flammable/Combustible Gas Detectors.

Sensor Cartridge SC2 for combustible gases

Exchangeable sensor including digital value processing, temperature compensation and self-control for the continuous monitoring of the ambient air.

APPLICATION:

The PolyGard®2 Sensor Cartridge is used for the detection of combustible gases in non-Ex zones.

FEATURES:

• Digital measurement value processing incl. temperature compensation
• Internal functional control with integrated Hardware Watchdog
•  Data / measured values in μC Sensor Cartridge, therefore simple exchange of SC uncalibrated <> calibrated
•  High accuracy, selectivity and reliability
•  Low zero point drift
•  Sensor with long life expectancy
•  Hardware & software according to SIL2 compliant development process
•  Modular technology (plug-in and replaceable)
•  Easy maintenance and calibration by exchange of the sensor cartridge or by comfortable on-site calibration
•  Reverse polarity protected, overload and short-circuit proof
•  IP 65 version
•  Conformity to
  o EN 50271
  o EN 61010-1
  o ANSI/UL 61010 1
  o CAN/CSA-C22.2 Nr. 61010-1

 

Sensor Board SB2

Sensor board with RS 485 interface for integration of the Sensor Cartridges SC2.

 For More Details please feel free to contact us 

FISCHER – FT61 – Temperature and Humidity Sensor

FISCHER FT61 New long-term stable temperature and humidity sensor with LCD for non-aggressive gaseous media

The digital humidity and temperature device is ideally suited for measuring moisture and temperature of non-aggressive gaseous media. For the monitoring process, the sensor unit can be used separately or integrated in a clean room panel.

The measuring device comprises a display unit and a sensor, which transfers the measured data via I²C bus to the display. Both units can be displayed at the same time or alternatively. The measuring ranges for humidity are between 0…100 % r.F ± 3 % and for temperature between: -40…100°C, ± 0.5°C.

The standard signals 0…10 V, 0… 20 mA und 4…20 mA are available for the analogue outputs.

Key Features:

• Capacitive humidity sensor
• Electronic temperature sensor
• Long-term stable without calibration
• High repeatability
• LC display with colour change of backlighting as clean room signal light user prompt in clear text, in-situ calibration or adjustment, integrated control unit / zeroing and setting without PC
• Password-protected
• Industry standard analogue output
• Rugged and constant sensor type out of VA (stainless steel) material
• Protection IP65 standard housing.

For details contact us 

MSR Electronic GmbH

MSR-Electronic offers stationary gas warning systems for reliable monitoring, leakage detection and analysis: sensors, controllers and warning devices.

Whether for compliance with the MAK values or for leakage monitoring, the MSR-Electronic gas warning systems detect continuously and reliably harmful gases. The products and solutions are found in many applications such as parking garages, refrigeration, biogas plants or shipping.

When you choose MSR-Electronic’s secure solutions and innovative products, you benefit from many advantages, such as quality and availability, competitiveness, and openness to meet your individual requirements.

For more details contact us

 

 

Portable Gas Measuring Device incl. Datalogger Series ADL-X1-11XX for Toxic Gases.

ALVI – India in association with ALVI – Australia we are pleased to offer you portable Gas measuring Device including Datalogger for Toxic and combustible Gases .

Portable gas measuring device with integrated datalogger for the continuous monitoring of the ambient air to detect the presence of toxic gases and vapours, as well as of oxygen. Up to 16,000 measuring values are recorded in the datalogger.
APPLICATION
For the detection and recording of toxic gases and vapours, as well as of oxygen in a wide range of commercial applications.
FEATURES
 Suitable for toxic gases and vapours, as well as for oxygen
 Measuring cycle adjustable from 2 sec. to 5 hours
 Datalogger for 16.000 measuring values
 Data readout via the USB port
 Data output in Excel standard format
 Internal rechargeable battery: Lifetime depending on sensor type
 Certified calibration

For more details please contact us on : info@alviautomation.com

Flammable / Combustible Gases sensor – online transmitter / Detector / Analyzer / Monitoring , Non Ex-proof area

Combustible gases (flammable ) detectors / Sensor Transmitters by world-class German technology

Gas detector or sensor transmitter for online, continuous monitoring of all combustible or flammable gases as below. These transmitters offer industry standard analog output in current or voltage form, or digital signals like Modbus RTU with RS485 serial interface.

Optionally, these are also equipped with potential free relays.

These can be mounted on wall, ceiling, columns, ducts or pipelines. These can be a single gas or multi-gas detection transmitters.

Nonexplosion proof sensor or detectors can be installed at non-hazardous area classified areas like kitchen, canteen, building, store rooms, warehouse, cold stores, offices, theatre, mall etc.

Name of combustible gases:

• Hydrogen
• LPG
• Methane
• Acetic acid
• Acetylene
• Acetone
• Ammonia
• Benzene
• Butyl acetate
• Cyclohexane
• Cyclopentane
• Ethane
• Ethyl acetate
• Ethyl Alcohol
• Ethylene
• Ethylene oxide
• Ethyl Ether
• Iso- butane
• Iso butyl alcohol
• Isopentane
• Iso propanol alcohol
• Iso propyl Alcohol
• Methanol
• Methyl ethyl ketone (MEK)
• n-butane
• n-pentane
• n-heptane
• n-octane
• nitrogen trifluoride
• Noname
• Petrol Vapour
• Hydrocarbons
• Solvent Vapour
• Propane
• Propane
• Propyl Alcohol
• Styrene
• Toluene
• Trimethylbenzene
• Vinyl Acetate
• Xylene

For more details click here

Toxic Gases – Sensor Transmitter / Detectors / Analyzer / Monitroing – Non Ex proof

Toxic Gas detectors / Sensor Transmitters By MSR Germany

Gas detector or sensor transmitter for online, continuous monitoring of all toxic gases as below. These transmitters offer industry standard analog output in current or voltage form, or digital signals like Modbus RTU with RS485 serial interface. Optionally, these are also equipped with potential free relays.

These can be mounted on wall, ceiling, columns, ducts or pipelines. These can be single gas or multi-gas detection transmitters, available with or without onboard display.

Name of toxic gases:

• CO / carbon monoxide
• CO2 / carbon dioxide
• H2 / Hydrogen
• C2H2/ Formaldehyde
• C2H4/ Ethylene
• F2 / Flourine
• Cl2 / Chlorine
• NO2 / nitrogen dioxide
• NO / Nitrous oxide
• SO2 / sulphur dioxide
• H2S / Hydrogen sulphide
• CS2 / carbon sulphide
• HCN / hydrogen cyanide
• HCl / hydrogen chloride
• NH3 / ammonia
• Hydrazine
• Phosphine
• Phosgene
• Chlorine dioxide
• Freon
• Ozone
• Oxygen
• Nitrogen
• Argon, Helium
• Silane
• VOCs, volatile organic compound
• Aerosols

For more details click here

Toxic Gas sensor – online Transmitter / Detector / Analyzer / Monitoring – Explosion proof (ATEX, IECEx, SIL2)

Toxic gas sensors / detector / transmitters / aNALYZER / mONITORING for explosion proof hazardous area (zone 1, 2)

Gas detector or sensor transmitter for online, continuous monitoring of all toxic gases as below. These transmitters offer German industry standard analog output in current or voltage form, or digital signals like Modbus RTU with RS485 serial interface. Optionally, these are also equipped with potential free relays.

These can be mounted on wall, ceiling, columns, ducts or pipelines. These can be single gas or multi-gas detection transmitters.

The sensor instruments are SIL 2 certified to offer best safety.

Name of toxic gases:

• CO / carbon monoxide
• CO2 / carbon dioxide
• H2 / Hydrogen
• C2H2/ Formaldehyde
• C2H4/ Ethylene
• F2 / Flourine
• Cl2 / Chlorine
• NO2 / nitrogen dioxide
• NO / Nitrous oxide
• SO2 / sulphur dioxide
• H2S / Hydrogen sulphide
• CS2 / carbon sulphide
• HCN / hydrogen cyanide
• HCl / hydrogen chloride
• NH3 / ammonia
• Hydrazine
• Phosphine
• Phosgene

For more gas list click here

Combustible Gas Sensor Transmitter / Detector / Analyzer / Monitoring – Explosion proof (ATEX, IECEx, SIL2)

Flammable or Combustible Gas Sensors – detectors or transmitter for online, continuous monitoring in hazardous area (zone 1, zone 2)

Gas detector or sensor transmitter for online, continuous monitoring of all toxic gases as below. These transmitters offer industry standard analog output in current or voltage form, or digital signals like Modbus RTU with RS485 serial interface. Optionally, these are also equipped with potential free relays.

These can be mounted on wall, ceiling, columns, ducts or pipelines.

The transmitters are SIL 2 certified instruments, for better safety.

Name of flammable or combustible gases:

Hydrogen	LPG	Methane
Acetic acid	Acetylene	Acetone
Ammonia	Benzene	Butyl acetate
Cyclohexane	Cyclopentane	Ethane
Ethyl acetate	Ethyl Alcohol	Ethylene
Ethylene oxide	Ethyl Ether	Iso- butane
Iso butyl alcohol	Isopentane	Iso propanol alcohol
Iso propyl Alcohol	Methanol	Methyl ethyl ketone (MEK)
n-butane	n-pentane	n-heptane
n-octane	nitrogen trifluoride	Nonane
Petrol Vapour	Hydrocarbons	Solvent Vapour
Propyl Alcohol	Styrene	Toluene
Trimethylbenzene	Vinyl Acetate	Xylene

For more details click here

Carbon Dioxide (CO2) Sensor / Transmitter / Analyzer / Monitoring – 20000ppm and 0-5% Vol

GasAlarm | ALVI Automation (India) Pvt Ltd (www.alviautomation.com) introduces the all new carbon dioxide (Co2) sensor / Transmitter / Analyzer / Monitoring for competitive Indian Market

Focused on qualitative products and consumer satisfaction with the support of our expert professionals MSR Germany, we are associated with System Integration, exporting and supplying a comprehensive variety of Carbon Dioxide (CO2) Sensor / Transmitter – 20000ppm, 0-5% Vol from Jaipur, Rajasthan, India.

MSR MC2 series CO2 offers industry standard analog (voltage or current) output, suitable for integration with any process signal controller / PLC system or SCADA.

MSR MC2 series CO2 is housed in a polycarbonate UL-V2 certified flame retardant enclosure with IP65 ingress protection. This enables only gas sample to pass through to sensor cell, but no dust and moisture, hence offering long sensor life and high accuracy.

Key Features:

1. Continuous, online monitoring

2. No cross-sensitivity due to background gases

3. No effects of humidity, moisture, temperature, radiation, vibrations etc

4. BMS, PLC integrateable

5. Suitable for any application

6. Long expected life Key Specifications:

7. Measuring range: 0~20, 000 ppm or 0~2% Vol/0-50%

8. Sensor technology: non-dispersive infra-red

9. sensor cell, Gold plated, dual beam

10. Output: linear, proportional analog (4-20mA, 2-10V) standard

11. Optional: RS485 Modbus RTU serial interface using SB2, MSB2 sensor board

12. Operating temperature: 0°C to +50°C

13. Low voltage operation 24V DC

Applications areas:

1. Cold storage like potatoes, apple, mango, kiwi, banana, etc

2. Controlled atmosphere chamber for kiwi, apples

3. Furnace, heated conveyor belts

4. Incinerators, manufacturing units

For more details Click here or please feel free to contact us

GasAlarm (www.gasalarm.co.in) is Restructured as ALVI Automation (India) Pvt Ltd (www.alviautomation.com) under Australasian strategy

• Please note the company GasAlarm(www.gasalarm.co.in) India has been restructured under Australasian strategy with new company ALVI Automation (India) Pvt Ltd(www.alviautomation.com) (Please refrain from dealing with Vinod Gogoriya who is no longer associated with our new company). This company from now onwards will sell, service, maintain all MSR Germany Gas Detection systems, BECK, JOLA, FISCHER and JOVENTA products
• We are the authorized distributor of Germany MSR, FISCHER, JOLA, JOVENTA and BECK. Since all the products are manufactured in Germany hence Quality and Reliability are assured
• All MSR gas monitoring falls under critical safety system for life and plant protection. They need periodic service and calibration and ALVI Automation can assist you in the same

We are the authorized distributors and country representative of few German companies for India and can offer you gas sensor/analyser for all toxic (CO, AIR Quality, H2S, SO2, NO2 etc), flammable gases (H2, LPG, CNG, benzene etc) and oxygen, DP switch for air, water, aggressive media, DP Transmitter for air , water, aggressive media, Electric actuators, Level transmitter for water, diesel, float switch, process instrumentation for diff. pressure, pressure, level, temperature, Humidity etc. both for safe and hazardous area(ZONE 1 and ZONE 2) applications (IEC-EX, ATEX, SIL2 certified) of make MSR/Germany, FISCHER/Germany, JOLA/Germany, JOVENTA/Germany, GREISINGER/Germany and BECK/Germany range of products

ALVI Automation India Pvt Ltd is a Div. of ALVI Technologies Pty Ltd, Sydney-Australia, in operation since 2003. The company also operates under GasAlarm Systems. We are a group of experienced engineers, offering gas detection monitoring and control systems, process instrumentation, measurement & control products and automation solutions. We have been involved in several automation industries in the Australasian region including now in India. Our mission is to grow consistently using the best global technologies in products and services offered to customers. Our aim is to best serve and maintain long term relationships by providing most cost effective appropriate solutions. We are committed towards customer satisfaction through quality products and services. Our vast clientele proves the same. AAIPL derives competitive advantage from its excellent track record, product strategy, and the expertise of its team. The team is a group of more than 15 young dynamic energetic extremely talented industry professionals, who are qualified, trained, motivated and experienced enough to serve our customers well.

 

Our Primary Focus :

• Critical Life Safety, Asset Safety, Asset Enhancement.
• Process control instrumentation, process optimisation most cost effective way.
• Energy saving, green house gas saving.
• Pollution monitoring for better environmental control.
• Industrial and Building Automation for better information flow, control.
• Service, calibration, maintenance for asset protection, improvement (We take pride in this).
• Training to customers, clients for effective use, operation of delivered system (we take pride in this too).

• ALVI Automation (India) Pvt Ltd and Gas Alarm India in association with ALVI Technologies Pty Ltd , Gas Alarm Systems Sydney Australia, Deals with cutting edge Germany range products which includes :
• MSR / Germany  gas sensors for H2, LPG, Hydrocarbons, LEL sensors, Methane, Hydrocarbons, Propane, Butane, LNG, CNG, Acetylene, Ethylene, Diesel fumes, CO2, VOC, SO2, H2S, HCN, HCI, NO, NO2 etc for hazardous(Zone 1 and Zone 2) and safe area application (IEC-EX, ATEX, SIL2, UL, CE certified)
• JOLA Germany range of Liquid spill, liquid level, temperature Instruments with ATEX certified.
• FISCHER / Germany range of Pressure, differential pressure, level, flow monitoring for air and liquid (Aggressive media) with (ATEX, SIL2 certified).
• JOVENTA / Frakta Germany range of damper/Electric actuators.
• GREISINGER / Germany Portable, standalone range of Liquid devices like PH, TDS, Conductivity, dissolved O2 etc and Gas measurement.
• BECK / Germany range of Pressure, Differential Pressure, Switches and Transmitters including for ATEX hazardous area.

 

• All these sensor/Field instruments are all based on German Technology, as all these sensors/Field Instruments are manufactured in Germany, hence quality and reliability are assured.

 

• ALVI Automation (India) Pvt Ltd  (alviautomation.com) is involved in design, engineering, sales, service of Gas Detection Systems, Monitoring and Control Systems, PLC, SCADA, Building Automation, Factory/Industrial Automation, Instrumentation, System Integration and Control Panels. The Gas Sensors/Control modules are made by our associates MSR in Germany.

        The systems find wide application in:

CO/NO/NO2 monitoring in underground car parks for ventilation fan control meeting BCA, Leed/USA, AS 1668.2 (saves 60-80 % energy costs – investment paid back in 3-6 months). Run the fans only when required meeting the regulations, safety standards, energy saving/greenhouse gas saving requirement

Indoor Air Quality Monitoring (VOC/CO2) in buildings and controlling fresh air ventilation intake fans only when required (saves 60-80% energy costs)

Refrigerant Gas Leak Monitoring and alarm systems (R134a, R410a, Ammonia, CO2, LPG etc) for various refrigerants to meet GWP (Global Warming Potential) and AS 1677 refrigeration safety standards

Toxic Gas/Combustible Gas/Oxygen monitoring, control, alarm systems for plant, industry, human safety (Oil/Gas, Petro-chemicals, mining, Power Stations, Chemical Industries, water/waste water treatment plants)

Hazardous Area Gas Detection Systems for Oil/Gas Industries (very good potential in Myanmar) , IEC-Ex, SIL 2 certifiedPollution/Emission monitoring systems (some typical parameters are CO, CO2 etc)

Pollution/Emission monitoring systems (some typical parameters are CO, CO2 etc)

On Line, continuous gas monitoring analyzers for CH4, CO2 and some other parameters for bio-gas, land-fill gas, methane drainage (Coal Bed Mining Methane)

Fumigation gases monitoring in grain silos (phosphine, methyle bromide etc)CO2 monitoring in oil/gas CO2 capture and storage

• In addition under ALVI Automation/GasAlarm, we provide instrumentation solutions like :
  1. Pressure, differential pressure, level, flow, volume Monitoring.
  2. Liquid leak, spill, level detection and monitoring including hydrocarbon spill on water.
  3. MSR Traffic – car parking, traffic navigation systems.(msr-traffic.de)

 

• Our valuable customers are Siemens-India, Johnson Controls-India, Honeywell India, Schneider electric India, Adani-group, BASF, L&T, BHEL, HCPL-HMEL, HONDA, Denso-International, Bluestar, Greenheck etc are regularly buying from ALVI Automation (India) PVT LTD with that we are covering all industry segments, oil&gas, petro-chemical, chemical, power, water/waste water, landfills, mining, food & beverage, laboratories, refrigeration industries and Defence Organizations. We take pride in meeting customer.

SERVICE & TRAINING :

AAIPL provides information to engineers, professionals and everybody who is interested in Instrumentation, Process automation and control.

We provide services & training on Process Automation and Control, like DCS (Distributed Control Systems), BMS (Building Management System), PLC (Programmable Logic Controller), Batch Control, PID, Advanced Control, Measurement, HMI (Human Machine Interface), Measurement, Process Instrumentation, Industrial Automation Training. Our services programs are designed to minimize downtime, delays and unforeseen expenditures. With a comprehensive maintenance we make sure your instruments are always in top operating order. This gives you the peace of mind.

 

AFTER-SALES SUPPORT :

Maintenance is as important for instruments as for relations. AAIPL understands the importance of service required after sales to maintain the product performance. Our business has been built around providing the highest quality products and services. Our team is ever ready to serve the customers at their back and call. We can ensure a prompt service, immediate response and quick access. We pride ourselves on our product selection, expertise, customer service and technical support.

For more information please do not hesitage to contact us

Proportional Ball Valves Actuator Model no: BMS1.1

As the process industry continues to achieve more efficient and productive plant design, plant engineers and technicians are faced, almost daily, with new equipment designs and applications. One product, a valve actuator, may be described by some as simply a black box, having an input (power supply or signal), an output (torque), and a mechanism or circuitry to operate a valve. Those who select control valves will quickly see that a variety of valve actuators are available to meet most individual or plant wide valve automation requirements. In order to make the best technical and economical choice, an engineer must know the factors that are most important for the selection of actuators for plant wide valve automation. Where the quality of a valve depends on the mechanical design, the metallurgy, and the machining, its performance in the control loop is often dictated by the actuator.

The decision to automate a valve is usually based on one or all of the following considerations.
• Safety
• Reliable operation
• Control and process system performance
• Inaccessible or remote valve location
• Cost
• Excessive valve torque
• Emergency response and whether it is fail-safe

Application
These electric actuators are designed for operating JOVENTA JV Ball Valves, by the means of the ZAK 2 linkage Kit.

Features
■■ DC 0(2)…10 V or 0(4)…20 mA control signal
■■ Up to 5 actuators in parallel operation possible
■■ Plug-in terminal block connection
■■ Simple mount on valves with ZAK2 linkage kit
■■ Selectable direction of rotation
■■ Manual release button
■■ 2 adjustable auxiliary switches
■■ Automatic shut-off at end position
(overload switch)

For more details Click here or feel free to contact us