Description

ALVI Automation/GasAlarm India in association with GasAlarm systems Australia presents the all-new Gas monitoring and control system for commercial and industrial applications.

MSR Germany Controller (Total Reliability and Safety inclusive of SIL2) Supplied by GasAlarm Australia )

Including with the following safety features like:
* Fail-Safe system
* SIL2 (Safety Integrity Level)
* Auto Diagnostic
* Critical life safety Enhancement

With Features:
• 96x Channel sensor analog input (4-20mA from Sensor)
•  Digital Output (DO) (potential-free contacts)
• Analog Output (AO)
• Power unit: 230/110 V AC to 24 V DC, 6.5 A
• Max. available space units 13
• Version according to UL 61010-1 (incl. warning buzzer)
• Can be integrated with 128 gas sensors, 96 of them PolyGard®2 digital and/or 32 of them analog (4 to 20 mA)
• Suitable for more than 50 different toxic, combustible and refrigerant gas types
• Simple and comfortable commissioning by configuration with standard parameters
• Logical system menu
• Flexible configuration thanks to programmable parameters and set-points
• Four free adjustable alarm thresholds per sensor
• Six menu languages, free adjustable
• Several alarm relays configurable per alarm
• Access to menu operation via four code levels
• Project protection
• Alarms in latching mode resettable via a digital input
• Temporary locking of transmitters possible for the customer
• Alarm release by falling or increasing gas concentrations selectable for each alarm
• Connector for DGC-EasyConf at the controller module
• Max. 32 relays with change-over contact, potential-free, max. 250 V AC/DC, 5 A (via GC06 module and 1 to 7 EP06 modules) and
• Max. 96 relays with change-over contact, potential-free, max. 250 V AC/DC, 5 A (via MSC2 / MSB2 / MGC2) and/or
• Max. 96 relays with change-over contact, potential-free, max. 30 VAC, 0.5 A (via WSB2)
• Fault relay with normally open contact, potential-free, max. 250 V AC, 5 A
• Maximum 16 analog outputs, 4-20 mA, with selective signal output for special mode, fault, etc.
• Up to seven EP-06 modules with integrated repeater function connectable
• EN 50545-1 conformity
• SIL 2 Level
• Shapely, durable housing

Optional:
• Option: Housing lockable
• Option: Monitoring of the connected warning devices for functionality and discontinuity
• Option: Integrated battery-backed UPS, incl. charge condition and low voltage control
• Option: Flashing light at power failure
• Option: Integrated warning buzzer
• Option: USB port for data logger function for all measured values, alarms and faults
• Option: Serial interface with Modbus or TLS protocol for the connection to BMS etc.
• Option: MainBus interface for the connection of several GC-06 controllers
• Option: Communication module for BACnet

For more details please feel free to contact us